9.8 KiB

Raw Blame History

Setup DNS records for your iRedMail server

[TOC]

NOTE: STILL WORKING IN PROGRESS

IMPORTANT NOTE: A, MX records are required, Reverse PTR, SPF and DKIM are optional but strongly recommended. All in all, set them all up please.

A record for server hostname

What is an A record

A records map a FQDN (fully qualified domain name) to an IP address. This is usually the most often used record type in any DNS system. This is the DNS record you should add if you want to point a domain name to a web server.

How to setup an A Record

Name: This will be the host for your domain which is actually a computer within your domain. Your domain name is automatically appended to your name. If you are trying to make a record for the system www.mydomain.com. Then all you enter in the textbox for the name value is www.

Note: If you leave the name field blank it will default to be the record for your base domain mydomain.com. The record for your base domain is called the root record or apex record.
IP: The IP address of your FQDN. An IP address can be thought of as the telephone number to your computer. It is how one computer knows how to reach another computer. Similar to the country codes, area codes, and phone number it is used to call someone.
TTL: The TTL (Time to Live) is the amount of time your record will stay in cache on systems requesting your record (resolving nameservers, browsers, etc.). The TTL is set in seconds, so 60 is one minute, 1800 is 30 minutes, etc..

Systems that have a static IP should usually have a TTL of 1800 or higher. Systems that have a dynamic IP should usually have a TTL of 1800 of less.

The lower the TTL the more often a client will need to query the name servers for your host's (record's) IP address this will result in higher query traffic for your domain name. Where as a very high TTL can cause downtime when you need to switch your IPs quickly.

Sample record:

NAME                TTL     TYPE    DATA

www.mydomain.com.   1800    A       192.168.1.2

The end result of this record is that www.mydomain.com. points to 192.168.1.2.

Reverse PTR record for server IP address

What is a reverse PTR record

PTR record or more appropriately a reverse PTR record is a process of resolving an IP address to its associated hostname. This is the exact opposite of the process of resolving a hostname to an IP address (A record). Example, when you ping a name mail.somedomain.com it will get resolved to the ip address using the DNS to something like 192.168.1.5. Reverse PTR record does the opposite; it looks up the hostname for the given IP address. In the example above the PTR record for IP address 192.168.1.5 will get resolved to mail.somedomain.com.

Why do you need a reverse PTR record

The most common use for looking up a PTR record is done by spam filters. Concept behind this idea is that fly by night spammers who send e-mails out using fake domains generally will not have the appropriate reverse PTR setup at the ISP DNS zone. This criterion is used by spam filters to detect spam. If your domain does not have an appropriate reverse PTR record setup then chances are email spam filtering softwares MIGHT block e-mails from your mail server.

How to setup a Reverse PTR record

You would most likely need to contact your ISP and make a request to create a reverse PTR record for your mail server IP address. For example, if your mail server hostname is mail.somedoamin.com then ask your ISP to setup a reverse PTR record 192.168.1.5 (your internet public IP address) in their revesre DNS zone. Reverse DNS zones are handled by your ISP even though you may have your own forward lookup DNS zone that you manage.

MX record for mail domain name

What is a MX record

Mail Exchanger Record or more commonly known as MX record is an entry in the DNS server of your domain that tells other mail servers where your mail server is located. When someone sends an e-mail to a user that exists on your mail server from the internet, MX provides the location or IP address where to send that e-mail. MX record is the location of your mail server that you have provided to the outside world via the DNS.

Most mail servers generally have more than one MX record, meaning you could have more than one mail server setup to receive e-mails. Each MX record has a priority number assigned to it in the DNS. The MX record with lowest number has the highest priority and that is considered your primary MX record or your main mail server. The next lowest mx number has the next highest primary and so on. You generally have more than one mail server, one being the primary and the others as backups, only one MX for mail server is OK too.

How to setup the MX record

If your ISP or domain name registrar is providing the DNS service, you can request them to set one up for you. If you manage your own DNS servers then you need to create the MX records in your DNS zone yourself.

SPF record for your mail domain name

What is a SPF record

SPF is a spam and phishing scam fighting method which uses DNS SPF-records to define which hosts are permitted to send e-mails for a domain. For details on SPF, please see http://www.openspf.org/

This works by defining a DNS SPF-record for the e-mail domain name specifying which hosts (e-mail servers) are permitted to send e-mail from the domain name.

Other e-mail servers can lookup this record when receiving an e-mail from this domain name to verify that sending e-mail server is connecting from a permitted IP address.

How to setup the SPF record

A new SPF-record type was recently added to the DNS protocol to support this (RFC4408).

However not all DNS and e-mail servers support this new record type yet, so SPF can also be configured in DNS using the TXT-record type.

Examples:

SPF record refer to MX record. It means emails sent from all servers defined in MX record of mydomain.com are permitted by sender organization.

mydomain.com.   3600    IN  TXT "v=spf1 mx mx:mydomain.com -all"

or SPF record refer to IP address directly. it means emails sent from specified IP address are permitted by sender organization.

mydomain.com.   3600    IN  TXT "v=spf1 ip4:192.168.1.100 -all"

-all means prohibit all others.

There're more valid mechanisms available, please check OpenSPF web site for more details.

DKIM record for your mail domain name

What is a DKIM record

DKIM allows an organization to take responsibility for a message in a way that can be verified by a recipient. The organization can be a direct handler of the message, such as the author's, the originating sending site's, or an intermediary's along the transit path. However, it can also be an indirect handler, such as an independent service that is providing assistance to a direct handler. DKIM defines a domain-level digital signature authentication framework for email through the use of public-key cryptography and using the domain name service as its key server technology [RFC4871]. It permits verification of the signer of a message, as well as the integrity of its contents. DKIM will also provide a mechanism that permits potential email signers to publish information about their email signing practices; this will permit email receivers to make additional assessments of unsigned messages. DKIM's authentication of email identity can assist in the global control of "spam" and "phishing".

A person or organization has an "identity" -- that is, a constellation of characteristics that distinguish them from any other identity. Associated with this abstraction can be a label used as a reference, or "identifier". This is the distinction between a thing and the name of the thing. DKIM uses a domain name as an identifier, to refer to the identity of a responsible person or organization. In DKIM, this identifier is called the Signing Domain IDentifier (SDID) and is contained in the DKIM-Signature header fields d= tag. Note that the same identity can have multiple identifiers.

How to setup the DKIM record

Run command in terminal to show your DKIM keys:

# amavisd showkeys
dkim._domainkey.iredmail.org.   3600 TXT (
  "v=DKIM1; p="
  "MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDYArsr2BKbdhv9efugByf7LhaK"
  "txFUt0ec5+1dWmcDv0WH0qZLFK711sibNN5LutvnaiuH+w3Kr8Ylbw8gq2j0UBok"
  "FcMycUvOBd7nsYn/TUrOua3Nns+qKSJBy88IWSh2zHaGbjRYujyWSTjlPELJ0H+5"
  "EV711qseo/omquskkwIDAQAB")

Note: On some Linux/BSD distribution, you should use command amavisd-new instead of amavisd. if it complains /etc/amavisd.conf not found, you should tell amavisd the correct path of its config file. For example:

# amavisd -c /etc/amavisd/amavisd.conf showkeys

Copy output of above command into one line, like below. It will be the value of DKIM DNS record.

v=DKIM1; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDYArsr2BKbdhv9efugByf7LhaKtxFUt0ec5+1dWmcDv0WH0qZLFK711sibNN5LutvnaiuH+w3Kr8Ylbw8gq2j0UBokFcMycUvOBd7nsYn/TUrOua3Nns+qKSJBy88IWSh2zHaGbjRYujyWSTjlPELJ0H+5EV711qseo/omquskkwIDAQAB

Note: BIND (The most widely used Name Server Software) can handle this kind of multi-line format, so you can paste it in your domain zone file directly.

Add a TXT type DNS record, set value to the line you copied above: v=DKIM1; p=....
After you added this in DNS, type below command to verify it:

# amavisd testkeys
TESTING: dkim._domainkey.iredmail.org      => pass

If it shows pass, it works.

Note: If you use DNS service provided by ISP, new DNS record might take some hours to be available.

9.8 KiB Raw Blame History